Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Industrial Cleaning-Fluidized Baths
FFB50
PLACE ORDER - Clean Extrusion and Injection Molding Tooling
- Fast Cleaning: • Minimizes Costly Production Equipment Down-Time • Reduces Any Impact on Hardness of Material; Cleans in One-Third the Time of Ovens
- No Tool Damage as Compared to Using Ovens, Torches, Wire Brushes, and Scraping
- Unattended Cleaning Reduces Labor Costs vs. Using Manual Cleaning Methods
- Typical ROI in 6 to 9 Months
- Not Abrasive to the Tooling
- Easily Burns Off Material in the Small Holes of Breaker Plates, Dies, Nozzles and Other Tooling
- Well Insulated, Built-to-Last and Energy Efficient (25 kWH Typical FFB52 Run)
- No Need for Consumables, Solvents or Any Other Chemicals
- Removes Most All Polymers from Tooling
Description
Description
FFB51 and FFB52 industrialfluidized baths are our mostpopular units due to theireconomical price and smallersize. They offer a front panelmounted rotameter for adjustmentof the fluidizing air flow andare ready for use out of thebox with the included chargeof aluminum oxide.For years, plastic manufacturershave come to depend on industrialfluidized baths (FFB series) forsafe, efficient and cost effectivecleaning of tooling, components,systems and parts (i.e. dies,breaker plates, nozzles, tools,tips, spinnerets, extruder screws,manifolds, etc.) The FFB Serieswill remove almost all polymers,including plastic, paint, epoxy,rubber and adhesives, as well asother hydrocarbon-based productssuch as oils, fluids, grease,lubricants and coatings.Parts immersed into the FFBseries are cleaned by the hightemperature (up to 600°C)environment within a bath mediaof fluidized aluminum oxide thatinstantly starts to degrade plasticto carbon, which then leaves thebath as CO2. This instant heatingand minimized quenching givesshorter cleaning times than withconventional ovens, and with theeven and consistent heat of thebath, results in greatly reducedmetal fatigue and tool damage.trodeks baths can be fluidizedwith either compressed house airor an inert gas such as nitrogenor argon. It should be noted thatfluidized baths and the actioncreated in the aluminum oxide arenot abrasive to items immersedfor normal cleaning or heat treatmenttimes. Typical cleaning timesrange from 30 minutes to 2 hoursdepending on bath loading,temperature and amount ofmaterial to be cleaned.The excellent thermalperformances the FFB seriesmake them a good choicefor basic heat treatment, testand calibration as well asreactive analysis.
FFB51 SPECIFICATIONS
Dimensions:
Overall External: 518 L x 518 W x 675 mm H (20.4 x 20.4 x 26.6")
Bath Internal: 255 diameter x 405 mm deep (10.1 x 16")
Working Volume: 255 diameter x 305 mm deep (10.1 x 12") (8.4" diameter when using parts basket)
Temperature Range: 50 to 600°C (122 to 1112°F)
Temperature Stability: ±1.0°C (8" immersion depth, with lid on after 2 hrs controlling at set point)
Display Accuracy: ±10.0°C (8" immersion depth, with lid on after 2 hrs controlling at set point)
Heat Up Time*:
Ambient to 300°C: 0.8 hrs
Ambient to 450°C: 1.75 hrs
Ambient to 600°C: 2.5 hrs
Air Supply: Clean, dry and oil free air, at a constant pressure of 30 psi, using a minimum ID air line of ½ inch (air flow adjustment is necessary when changing temperatures)
Fluidizing Bed Medium: Aluminum oxide 120 mesh 85 lb
Electrical Requirements: 240V, 1 phase, 60 Hz, 4 kW
Exhaust Fan Requirements: 7125 1/min (250 ft3/min) at 5 in WG
Gross Weight: 97.5 kg (215 lb)
Net Weight:
FFB51: 59 kg (130 lb)
Aluminum Oxide: 38.5 kg (85 lb)
FFB52 SPECIFICATIONS
Dimensions:
Overall External: 518 L x 602 W x 1049 mm H (20.4 x 203.7 x 41.3")
Bath Internal: 255 diameter x 762 mm deep (10.1 x 30")
Working Volume: 255 diameter x 660 mm deep (10.1 x 26") (8.4" diameter when using parts basket)
Temperature Range: 50 to 600°C (122 to 1112°F)
Temperature Stability: ±1.0°C (18" immersion depth, with lid on after 2 hrs controlling at set point)
Display Accuracy: ±10.0°C (18" immersion depth, with lid on after 2 hrs controlling at set point)
Heat Up Time*:
Ambient to 300°C: 2 hrs
Ambient to 450°C: 3.5 hrs
Ambient to 600°C: 5 hrs
Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ