Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Process Multimeter Loop Power- 4 to 20 mA Digital Multimeter Output Function
CA450 Series
PLACE ORDER - 4 to 20 mA Step, 0 to 100% Toggle, Auto Step, Sweep Output
- Transmitter Simulate by SINK Function
- HART® Mode Setting with Loop Power (Adds 250Ω Resistor)
- 24V Loop Power Supply and mA Measurement Available Simultaneously
- High Accuracy Measurement of DC mA 0.05%, 30.000 mA
- DCS Power Supply Crest Value Measurement by Peak Hold Function
- Direct Reading (ACA/ DCA) of Various Signals by Sensor Mode
- Data Transmission by PC Communication with IR-USB*
Description
Description
The trodeks® CA450 ProcessMultimeter is a portable testinstrument to combine a digitalRMS multimeter and a loopcalibrator to give processtechnicians the same functionalityin one tool. The model CA450provides 24V loop power, reducingthe need for carrying a separatepower supply when performingtransmitter testing. And with itsbuilt-in, selectable 250? Hartresistor, it also eliminates the needfor a separate resistor. Processtechnicians can now do the samejob while carrying less equipment.* For details visit trodeks.com/ir-usb
Specifications
Measurement Functions: DC voltage, AC voltage, DC current, resistance, frequency, continuity check, diode test; data hold (D•H), auto hold (A•H), peak hold (P•H), auto range (Auto), range hold (range hold), maximum, minimum, and average value recording and measurement, zero adjustment (q), relative measured value display (REL, REL %), 24V loop power supply, internal resistor on/off for HART communication
Output Functions: 20 am DC current for current output SOURCE and current output SIMULATE (SINK); current span switching and current sweep output
Measurement Operation Method: Modulation
Output: Multiplicative DA
Display: 5-digit LCD (7 segment)
Numeric Display, DC Current:
Measurement: 33000
Output: 25000
Frequency: 19999
Other: 6600
Sub Display: Displays supplemental information for various functions
Polarity Indicator: Automatic display; only the minus sign “–” appears
Over Range Indicator: “OL”
Low-Battery Indicator: Appears when the battery voltage is below the operating voltage
Measurement Cycle: 2.5 to 5 times a second (however, frequency measurement takes place once a second)
Operating Temperature and Humidity: -20 to 55°C (-4 to 131°F) (80% RH or less) with no condensation; within the range of 40 to 55°C (104 to 131°F), the humidity must be 70% RH or less
Storage Temperature and Humidity: -40 to 70°C (-40 to 158°F) (70% RH or less) with no condensation
Temperature Coefficient (Typical): In the ranges of -20 to 18°C (-4 to 64.4°F) and 28 to 55°C (82.4 to 131°F), add the accuracy of 23°C ± 5°C × 0.1/°C
Power Supply: 4 “AA” alkaline batteries (1.5 V LR6) included
Battery Life: When using alkaline batteries
DC Voltage Measurement: A pproximately 140 hours
DC Current Output (SIMULATE): A pproximately 140 hours
DC Current Output (SOURCE)
12 mA (500 q load): Approximately 10 hours
Insulation Resistance: 100 MΩ or greater at 1000 Vdc
Withstand Voltage: 6.88 kVac for five seconds (between the input terminals and the case)
External Dimensions: Approximately 90 W x 192 H x 49 mm D (3.5 x 7.5 x 1.9")
Weight: Approximately 600 g (1.3 lb) (including the batteries)
Safety Compliant Standards: EN61010-1 and EN61010-031
Measurement Categories: 1000V CATIII, 600V CATIV
For Current Measurement and Output: 48 V maximum, 100 mA maximum CAT I
Lead Cables (98064): 70 Vdc, 100 mA CAT I; pollution degree 2, indoor use
Vibration: Sweep vibration frequencies 10 to 5 Hz to 10 Hz; amplitude 0.15 mm (peak value); duration 30 minutes
Shock: 1 m (3.3') drop test as defined by safety standards
Altitude: 2000 m (6562') or less
EMC Standards: EN61326-1 Class B, EN61326-2-2; EN55011 Class B Group 1; influence of radiated immunity: In RF electromagnetic fields of 3 V/m
EN61326-1:
AC Voltage Measurement, 600 mV Range: 1.5% of range
DC Voltage Measurement, 600 mV Range: 1% of range
DC Current Measurement, All Ranges: 1.5% of range
DC Current Output: 1.5% of range
EN61326-2-2:
AC/DC Voltage Measurement, 6V Range or Higher: Within 5 times the accuracy Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ