Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Digital Paddlewheel Meters
FP2000 Series
PLACE ORDER - High Accuracy Digital Paddlewheel Technology
- Pipe Sizes from 3/8 to 2"
- Tamper Proof Factory Programming
- Easy to Read 6-Digit LCD Display, Up to 4 Decimal Places
- Battery Operated (2 "AAA" Batteries Included)
- Very Low Pressure Drop
- Total Reset Function Can be Disabled
Description
Description
The FP2000 Series is designed to measure the flow of a fluid in a pipe. The meter is factory calibratedto any engineering units and displays the rate of flow, total or both (depending on the model selected) on a 6-digit LCD display. Two “AAA” batteries power the unit for up to one year. There are three models available: FP2000-R is a rate meter designed to measure and display the rate of flow; FP2000-T is a totalizer meter designed to measure and display the total flow; FP2000-RT is a rate/totalizer meter designed to measure and display both the rate of flow and the total flow.
Measuring accuracy requires a fully developed turbulent flow profile. Pulsating, swirling and otherdisruptions in the flow stream will affect accuracy. Flow conditions with a Reynolds Number greaterthan 4000 will result in a fully developed turbulent flow. A Reynolds Number less than 2000 islaminar flow and may result in inaccurate readings.
Reynolds Number Equation:
Reynolds Number=(3160 x Q x G)/(D x V)
Where:
Q = Flow rate of the fluid in GPM
G = Specific gravity of the fluid
D = Pipe inside diameter in inches
V = Fluid viscocity in centepoise
Minimum Straight Pipe Length Requirements
| The meter’s accuracy is affected by disturbances such as pumps, elbows, tees, valves, etc., in theflow stream. Install the meter in a straight run of pipe as far as possible from any disturbances. Thedistance required for accuracy will depend on the type of disturbance. | | Disturbance Type | Min
Inlet Pipe Length | Min
Outlet Pipe Length | | Flange | 10x pipe ID | 5x pipe ID | | Reducer | 15x pipe ID | 5x pipe ID | | 90° Elbow | 20x pipe ID | 5x pipe ID | | Two Elbows-1 Direction | 25x pipe ID | 5x pipe ID | | Two Elbows-2 Directions | 40x pipe ID | 5x pipe ID | | Pump or Gate Valves | 50x pipe ID | 5x pipe ID |
|
SPECIFICATIONS
Max Working Pressure: 20 bar (300 psi) at 21°C (70°F)
Max Fluid Temperature: 93°C (200°F) at 0 psi
Max Ambient Temperature: -10 to 43°C (14 to 110°F)
Full Scale Accuracy: ±2%
Power Requirement: 2 "AAA" batteries (included)
Enclosure: NEMA 4X (IP56)
Maximum Pressure Drop: 0.6 BAR (8 psi) (varies per model)
Approximate Shipping Wt: 0.91 kg (2 lb)
Materials of Construction
Pipe Fitting: Polypropylene (FP2000 series) or PVDF (FP2100 series)
Sensor, Paddlewheel, Axle: PVDF
Sensor O-ring seals: FKM
Enclosure: ABS Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ