Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Gas Turbine and Transmitter Systems with ATEX Enclosures
SYS/FTBG-100 Series
PLACE ORDER - Outstanding Accuracy
- Hybrid Ceramic Bearings for Superior Life
- DC or AC (Optional) Power
- Pulse and Analog Output
- Optional Hi and Lo Alarms
- Factory Configured
- Windows® Configuration Software (Included)
- Nist Certificate Standard
Description
Description
trodeks’s high accuracy GasTurbine Series measures thevolumetric flow of gas through apipeline. Gas flowing through themeter turns the turbine rotor at anangular velocity which isproportional to the velocity of thegas being measured. As theturbine rotor turns, the rotor bladespass a non-intrusive pickup coil thatgenerates an electrical signal,referred to as a pulse. Each pulserepresents a specific volume of gas(i.e. ACF/AM3). The totalization of thesepulses results in the total volumetric flow. The totalvolume can be converted to mass flow total (SCF orNM3) using reference conditions and base density, orby applying various correction techniques.Standard calibrations for these gas turbine systemsare performed at a reference density of 0.1 lb/Ft3. A10-point calibration certificate (traceable to NIST orother recognized national laboratory) is supplied witheach meter. Standard calibration includes a calculatedK-factor for gas that is derived from a 10-point NISTcalibration for water. Calibrations at customer’s actualoperating densities can be performed with specialorder.trodeks’s gas turbine flowmeters offer high accuracymeasurement of gases for a wide variety of applications,including fiscal measurement, plant cost allocation,energy consumption/conservation, etc. These gasturbine systems are suitable for all non-corrosivegases such as natural gas, air and nitrogen. Specialversions of this series are available for use oncorrosive gases, such as “off-gas” and feature NACEMR175trim and self-lubricated ceramic ball bearings.Contact trodeks for further details.An trodeks® gas turbine flowmeter should be chosenso that it is operated within its most accurate range.The capacity of a turbine flowmeter is based on theactual volumetric flow rate and is expressed as actualcubic feet (ACF) or actual cubic meters (AM3). Thelower limit of operation is a function of the gas densityand velocity.
SPECIFICATIONS (TURBINE)
Over-range: 150% of maximum flow (intermittently)
Turn Down Range: Dependent on gas density at user’s operating conditions
Linearity: ±1% of reading typical
Repeatability: ±0.25% over tabulated repeatable range
Available Temperature Range: -157 to 149°C (-250 to 300°F) continuous
End Fittings (Standard): NPT
Bearing Styles: Self-lubricating, ceramic hybrid ball bearings
Materials: 316/316L dual rated stainless steel with 17.4 pH rotor
SPECIFICATIONS (SIGNAL CONDITIONER)
Input Signal Type: MCP pickup
Input Frequency Range: 0.2 Hz to 4 KHz
Signal Level: 10 mV rms to 30 Vdc
Power Supply: 13 to 30 Vdc standard, 100 to 240 Vac (-AC) (optional), reverse polarity protection
Analog Output: 4 to 20 mA, 1 to 5V, 24 mA overflow condition (dip switch selectable)
Load Resistance: Max 650 Ù @ 24 Vdc
Accuracy: °0.02% of full scale
Temperature Drift: 40 ppm/°C
Pulse Output: 0 to 5V Recommended Minimum Load
Resistance: 50 KÙ
Pulse Scaling: Divide by 1,10,100 per flow unit of measure
Hi/Lo Alarm (Optional): Relay (2A, 30 Vdc), 0 to 5V, open collector (0.5A, 30V)
Communications: RS232 port for configuration and diagnostics
Linearization: Up to 20 points
Operating Temperature: -40 to 85°C (-40 to 185°F)
Humidity: 0 to 90% non-condensing
Enclosure: Extruded aluminum explosion-proof ATEX
Port: 3/4-14 NPT
Regulatory: CE compliant Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ