Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Input Loop Powered DIN Rail Multi-Channel Isolators
DRI-LPI
PLACE ORDER - Up to 4 Loop Isolators in a Single Package
- Prevents Ground Loops
- High Density DIN Rail Mounting
- Provides up to 4 Isolated DC Current Outputs in Proportion to the Input Currents
- ASIC Technology
Description
Description
The DRI-LPI Series are DIN rail mount, loop-poweredisolators with single (DRI-LPI-MA), dual (DRI-LPI-2MA)or quad (4) channel (DRI-LPI-4MA) capability. Eachchannel accepts a 0 to 20 mA or 4 to 20 mA inputand outputs a proportional 0 to 20 mA or 4 to 20 mAsignal. The DRI LPI Series provides 1800 Vdc signalisolation from input to output and channel to channel.
All DRI-LPI Series modules feature plug-in screwterminals for easy installation and low Mean-Time-To-Repair (MTTR). Two or more modules can slidetogether and interlock for solid, high density mounting.This is accomplished by removing either the foot or theadjacent unit’s faceplate (for right-hand side or lefthandside mounting, respectively). The module to beattached will easily slide on to the side of the mounted unit.
Loop-powered isolators are used to isolate processsignals transmitted between field instrumentation,programmable logic controllers (PLC), distributedcontrol systems (DCS) and data acquisition systems(DAS). Outputs from these systems can also driveone or more isolator channels of the DRI-LPI Series.Field devices such as flow, level or temperaturetransmitters can also drive a DRI-LPI Series isolatorchannel. The 1800 Vdc isolation capability preventsground loops from causing errors in 4 to 20 mAcurrent signals and can reduce susceptibility to radiofrequency interference (RFI). Isolation also providesprotection from high voltages and current spikes whichcan damage expensive supervisory control and dataacquisition (SCADA) equipment, such as a PLC or DCS.
The DRI-LPI Series operates as a loop-poweredisolator, with each channel deriving its power fromthe input loop current, 0 to 20 mA or 4 to 20 mA. Theeffective load of a DRI-LPI Series isolator channel ona loop is 300 Ω plus the output load resistance. Forexample, if the load on an output of the DRI-LPI Seriesis 500 Ω, then the current loop connected to the inputwould need to drive 300 Ω plus 500 Ω (i.e. 800 Ω) at amaximum current of 20 mA, or 800 Ω x 20 mA whichequals 16.0V.
The DRI-LPI Series is protected from reverse inputpolarity and output short circuit. A span pot is providedfor each channel in order to calibrate the output to theload.
Specifications
Number of Channels:
DRI-LPI-MA: 1 channel
DRI-LPI-2MA: 2 channel
DRI-LPI-4MA: 4 channel
INPUT
Range: 0 to 20 mA, 4 to 20 mA; 30 Vdc max each channel
Voltage Drop: 6V (300 Ω), plus output load
OUTPUT
Range: 0 to 20 mA, 4 to 20 mA
Drive: 10V or 500 Ω max @ 20 mA, 100 Ω minimum
Output Accuracy: Better than ±0.2% of full-scale, including linearity, hysteresis and repeatability, maximum
Linearity: 0.1% of span typical, from 4 to 20 mA at 250 Ω load
Stability: ±0.02%/°C of span max for full-scale and zero
Load Regulation: ±0.1% of span, typical per 10 Ω change
Common Mode Rejection Ratio: > 100 dB (DC to 60 Hz)
Isolation: 1800 Vdc, input-to-output and channel-to-channel
ESD Susceptibility: Capable of meeting IEC 801-2 level 3 (8 kV)
Response Time: 50 msec typical, 100 msec max (10 to 90%, each channel)
Temperature:
Operating: -40 to 80°C (-40 to 176°F)
Storage: -40 to 80°C (-40 to 176°F)
Humidity (Non-Condensing): 25 to 95% RH @ 40°C (104°F)
Wire Terminals: Socketed screw terminals for 12 to 22 AWG
Weight: 154 g (0.34 lb) Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ