Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
1-16 DIN Ramp-Soak Temperature-Process Controllers
CN6201 Series
PLACE ORDER - Dual Display
- PID Control
- Universal Input
- Single 16-Segment Ramp/Soak Program
- RS485 Communications (Optional)
- Alarms (Optional)
- Retransmission Output (Optional)
Description
Description
The CN6201 Series temperaturecontrollers have 1 program patternconsisting of 16 segments that caneasily be set and operated. The2 event outputs are provided asstandard. External contact input,RS485 communication andretransmission outputs are optional.The universal input supportsthermocouple, RTD and voltage inputtypes and the 3 types of outputs. Thefront panel has a splash-proof anddust-proof design (IP65).
| Input Type | Range (°C) | Range (°F) |
| Thermocouple | K | -270 to 1370 | -300 to 2500 |
| 0 to 600 | 32 to 999.9 |
| 0 to 400 | 32 to 750 |
| -199.9 to 200 | -300 to 400 |
| J | -199.9 to 999.9 | -300 to 2100 |
| T | -199.9 to 400 | -300 to 750 |
| E | -199.9 to 999.9 | -300 to 1800 |
| R | 0 to 1700 | 32 to 3100 |
| S | 0 to 1700 | 32 to 3100 |
| B | 0 to 1800 | 32 to 3200 |
| N | -200 to 1300 | -300 to 2400 |
| L | -199.9 to 900 | -300 to 1600 |
| U | -199.9 to 400 | -300 to 750 |
| Platinel 2 | 0 to 1390 | 32 to 2500 |
| RTD | Pt100 | -199.9 to 850 | -199.9 to 999.9 |
| 0 to 400 | 32 to 750 |
| -199.9 to 200 | -300 to 400 |
| -19.9 to 99.9 | -199.9 to 999.9 |
| JPt100 | -199.9 to 500 | – |
SPECIFICATIONS
PV/SP Data Display: 4-digit, PV/SP separately
PV Inputs:
Method: Universal input
Thermocouple: Types K, J, T, E, R, S, B, N, L, U, Platinel 2
RTD: Pt100, JPt100
Voltage: 0 to 100mV, 0 to 5V, 1 to 5V, 0 to 10V
Input Accuracy:
Thermocouple: ±2°C ±1digit
RTD: ±1°C ±1digit
Voltage (mV, V): ±0.3% ±1digit
Sampling Period: 500 ms
Number of Program Patterns: 1
Number of Program Segments: 16
Program Time Span: 0 s to 1,599 hr
Accuracy of Program Time Span: ±2% of program time span
Control Ouput:
Relay Output: Time-proportional PID or on/off
Voltage Pulse Output: Timeproportional PID 4 to 20 mAdc Output: Continuous PID
Event Output:
Number of Points: 2 relay
Type: PV and time
Power Supply: 100 to 240 Vac or 24 Vac/dc (optional)
Safety and EMC Standard: CSA, CE and UL
Construction (Front Protection): IP65
Dimensions: 48 W x 48 H x 100 mm D (1.89 x 1.89 x 3.94")
Weight: Approx. 200 g (0.44 lb)
External Contact Input (Optional): Run/reset, hold/cancel hold
PV Retransmission Output: 4 to 20 mAdc
RS485 Communication (Optional): MODBUS/Ladder/PC-link protocol
24 V Power Supply (Optional): 24 Vdc/24 Vac
Measured Value (PV) Input
Input: 1 point
Type: Universal
Accuracy (at 23 ±2°C Ambient Temperature):
Thermocouple: ±2°C ±1digit
Input -200 to -100°C: ±4°C
Input -100 to -0°C: ±3°C
Types R and S: ±5°C (±9°C for 0 to 500°C)
Type B: ±9°C (accuracy is not guaranteed for 0 to 400°C)
RTD: ±1°C ±1digit
Voltage(mV, V): ±0.3% ±1digit
Sampling Period for Measured Value Input: 500 ms
Burn-Out Detection: Functions for thermocouple or RTD input (burn-out upscale only; cannot be switched off)
Input Resistance: 1 MΩ or greater for thermocouple or mVdc inputs; approx. 1 MΩ for Vdc input
Maximum Allowable Signal Source Resistance: 250 Ω for thermocouple or mVdc inputs; 2 kΩ for Vdc input
Maximum Allowable Wiring Resistance for RTD Input: 10Ω/wire (the resistance values of 3 wires must be the same.)
Allowable Input Voltage: ±10 Vdc for thermocouple or mVdc inputs; ±20 Vdc for Vdc input
Noise Rejection Ratio:
Normal Mode Noise: Minimum 40 dB (50/60 Hz)
Common Mode Noise: Minimum 120dB (90 dB for Vdc input)
Error of Reference Junction Compensation: ±1.5°C (at 15 to 35°C); ±2.0°C (at 0 to 50°C) The reference junction compensation cannot be switched off
Applicable Standards: Thermocouple and RTD, JIS/IEC/DIN, (ITS90)
Retransmission Output (Optional)
Output Signal: Measured value in 4 to 20mAdc can be scaled.
Maximum Load Resistance: 600 Ω
Output Accuracy: ±0.3% of span (at 23 ±2°C ambient temperature)
Power Supply and Isolation
Power Supply:
Voltage:
Frequency: 50 or 60 Hz
Maximum Power Consumption:
Memory: Non-volatile
Withstanding Voltage: Between Primary and Secondary
Terminals: 1500 Vac for 1 minute (see Notes 1, 2 and 3)
Insulation Resistance: Between Primary and Secondary
Terminals: 20 MΩ or more at 500 Vdc (see Notes 1, 2 and 3)
Note 1: The primary terminals are the powersupply terminals and event output terminals.The secondary terminals are the analog inputand output terminals, the voltage pulse outputterminals, and the contact input terminals.
Note 2: The withstanding voltage is specifiedas 2300 Vac per minute to provide a marginof safety.
Note 3: AC/DC 24 V terminals are secondaryterminals. Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ