Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Rotameter with Alarm
FLSW3400 and FLSW3500 Series
PLACE ORDER - HIGH or LOW Alarms
- Compact Design
- Liquid or Gas Applications
- High or Low Flow Cutoff Applications
- Dip Switch Configurable Buzzer, Relay, and LED
Description
Description
The 150 mm High/Low Alarm Flow Meter with OpticalSensor Switch is a noninvasive means for detection ofa HI or LOW flow. This sensor is ideal for signaling analarm, cutoff valve, or other device when the floatpasses the detector (alarm, valve, etc. not included).
The FLSW Series helps protect your processes andequipment from damage caused by extreme flowrates. Its compact design and ease of operationmake it a unobtrusive, simple-to-use addition to yourflow meter.
This meter is perfect for OEM applications. Usewhenever maximum or minimum flow levels need tobe monitored automatically.
The FLSW Series also can be used in conjunctionwith a control relay to power alternate equipment ormonitoring devices.
Principle of Operation
A small, LED sensor and receiver are mounted onone side of the flow meter. The float inside the flowtube is detected as it passes across the beam of light.Sensor can be used to detect float passage beyondthe setpoint of the sensor. It can also be set to monitorfloat position at a specific level, signalling when float isoutside of the range of the sensor light beam.
DIP Switches are located next the the 9-pin Dconnector. In order to activate the alarm sensors thecorresponding switch has to be in the “ON” positionon the DIP switch. The relay output or the buzzer orthe green LED can be separately set for momentaryor latch operation. If for example DIP Switch SW1 isset to “ON”, when the left sensor is active, the relayand the green LED will be energized in the latchmode. It will remain latched until the RESET button ispressed or external RESET TTL signal is applied.
SPECIFICATIONS
Accuracy: ±2% of full scale
Repeatability: 0.5% of full scale
Ambient Temperature: 0 to 70°C(32 to 158°F)
Maximum Pressure: 200 psig
Connections: 1/8" FNPT
End Blocks: Aluminum or 316Stainless Steel
Elastomers: Buna & FKM(Aluminum), FKM (316SS)
Tube: Borosilicate
Floats:Glass or 316 Stainless Steel or Tantalum
Input Power: 12 Vdc, 15 Vdcmaximum, 250 mA regulated,peak to peak maximum 100 mV
Power Consumption:Less than 200 mA
Response Time: 500 milliseconds
Source of Light: 65 nm, red LED
Light Immunity: Pulse modulated
Dry Contact Closures: 2 normallyopen, and normally closed relays 91A,30 Vdc max.)
Alarm Options: High, Low or High/Low
Buzzer: User configurable, momentaryor latch through DIP switch setting
Reset: Reset button or remotethrough “D”-through “D”-connector, todisable relay orbuzzer
Interface: 9-pin“D”-connector
Optional: 12 Vdcpower supply,tripod base
Dimensions:
AlarmElectronicsEnclosure: 51.1 x 76.2 mm(2.01 x 3.00")
Enclosure #2with Phone Plug: 30.5 x 14.2 mm (1.2 x 0.6") Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ