Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
DC Powered DIN Rail 4 to 20 mA Signal Splitter
DRI-SP-DC
PLACE ORDER - Provides Two Fully Isolated 4 to 20 mA Outputs in Proportion to a Single
- 4 to 20 mA Input
- 2000 Vac Isolation
- High Density DIN Rail Mounting
- Universal DC Power 10.8 to 26.4 Vdc
- Plug-in Terminals
Description
Description
The model DRI-SP-DC is a DIN rail mount,4 to 20 mA signal splitter, with 2000 Vac isolationbetween input,output and power. It provides two fullyisolated 4 to 20 mA outputs in proportion to a single4 to 20 mA input. Front accessed zero and spanpotentiometers allow 50% adjustment of offset andgain to compensate for sensor errors or signal losses.
The DRI-SP-DC features plug-in screw terminalsfor easy installation. Two or more modules can slidetogether and interlock for solid, high density mounting(remove either the DIN rail foot or the adjacentunit’s faceplate, for right side or left side mounting,respectively). The module to be attached will easilyslide onto the side of the mounted unit.
DC input four-wire transmitters are used to isolateand convert DC signals into proportional, standardindustrial control signals. Typically an industrial controlsystem such as a DCS or PLC requires standardindustrial control signals with full isolation to ensurereliable, strong signals.
In most industrial process control or data acquisitionapplications, several different input sources fromvarious field instruments (e.g. level, flow, pressure andposition sensors), are common. Four-wire transmittersaccept these field inputs and provide the controller(DCS & PLC) with the standard industrial signal itrequires. The four-wire transmitter will increase thesignal drive to high impedance loads and may improveresolution of the process variable. The DRI-SP-DCoperates as a four-wire transmitter and derives itspower from an independent, transformer isolated DCpower source (10.8 to 26.4 Vdc).
Specifications
INPUT
Range: 4 to 20 mA
Impedance: ≤ 20 Ω
Protection: Withstands up to 24 Vdc without damage
Common Mode: 2000 Vac, input to ground
OUTPUT (2 Channels)
Range: 4 to 20 mA
Current Output Compliance: 15V (750 Ω, max)
LED Indication: Green LED indicates power on
Output Accuracy:
≤ ±0.1% of full-scale input typical
≤ ±0.2% maximum @ 23°C including linearity, repeatabilityand hysteresis
Adjustability: Front accessed 10 turn pot, ± 50% of range forzero and span
Stability: ≤ 0.025%/°C of full-scale maximum for full-scaleand zero
Isolation: ≥ 2000 Vac between input and output and channelto-channel
Response Time: 25 msec typical (10 to 90%)
Power: 10.8 to 26.4 Vdc, 2 W per channel max
Temperature:
Operating: -5 to 60°C (23 to 140°F)
Storage: -40 to 80°C (-40 to 176°F)
Humidity (Non-Condensing):
Operating: 15 to 90% RH @ 45°C (113°F)
Soak: 90% RH for 24 hours @ 60°C (140°F)
Wire Terminal: Socketed screw terminals for 12 to 22 AWG
Weight: 227 g (0.5 lb) Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ