Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Electronically Controlled Proportioning Valves
PV14
PLACE ORDER - Programmable Direct or Reverse Acting Control
- Precision Control Is Achieved Via a 10-Bit Converter Controlling a 200 Step Per Revolution Motor
- Rugged Construction for Industrial Applications
- External Safety Override Contacts to Open/Close Valve
- NEMA-4 Rating for Outdoor Use
- Ideal for Liquid and Gas Applications
Description
Description
An electronically controlled proportioning valve (ECV) will take an electrical input signal (usually 4-20 mA) and proportion the amount of flow through a pipe from fully closed to fully open. These valves are used in industrial automation controls as proportional actuators and other industrial control applications. The trodeks ECV valve features programmable reverse or direct acting control. Direct acting means that, as the current signal rises, the valve allows more flow, while reverse acting will decrease the flow rate with an increasing current signal. These units can also be programmed to sense a failure in the current loop and fully close/ open the valve upon the signal level’s dropping below 4.0 mA. Dry contact remote switches can be used in conjunction with the standard current signal to provide an alarm signal which fully closes/opens the valve. The rugged epoxy-coated aluminum package insures NEMA-4X protection or the powerful microprocessor and servo actuator.
SPECIFICATIONS
ELECTRONICS:
Power Supply: 12-16 Vdc @1.5 A (10 Watts typ, 23 Watts max) (2.5 Amps for 3 /4 valve, 38 Watts max)
Inputs: 4-20 mA control signal (250 ohms impedance), and dual external switch contact sensing via 5 Vdc signal
Control Modes: direct or reverse, full or split range, high or low range, fail condition open or closed
Adjustments: None
Operating Temp.: 0 to 49°C (32 to 120°F)
Enclosure: NEMA-4X, epoxy painted aluminum
Connections: 1 /2 NPT conduit (16" 22 AWG pigtail leads)
ACTUATOR:
Type: DC step motor, 200 steps/rev, 4 rev travel Resolution: 200:1 (0.5%) (4 steps increment)
Speed: 18 rpm
Torque: 57.5 in-oz (188 in-oz 3 /4 valve)
VALVE:
Type: In-line globe
Temp.: 0 to 250°F (-18 to 120°C
Pressure: 120 psi max (70 psi on 3 /4 "valve)
Max Flow: GPM= Cv (DP/SG) 1 /2 liquids; for gases use standard equation found in solenoid valve section
Wetted Parts: Ethylene propylene rubber O-ring, PTFE washer, and valve body. (Brass models have 303 SS internal trim.)
COMPLETE UNIT:
Dimensions: 216 H x 185 W x 137 mm D (8.5 x 7.3 x 5.4"); /2 valve: 229 H x 185 W x 137 mm D (9 x 7.3 x 5.4"); /4 valve: 305 H x 203 W x 191 mm D (12 x 8 x 7.5")
Weight: 3.2 kg (7 lbs); 1 /2 valve: 4.5 kg (10 lb); 3 /4 valve: 8.2 kg (18 lb) Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ