Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Product Groups
Low Cost Conductivity Level Switch Systems for Liquids Only
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
LVC Series, LVC500 Series
PLACE ORDER 
  • No Moving Parts for Long Life Reliability
  • Wide Chemical Compatibility
  • Works for Conductive Liquids
  • SPDT Relay Output
  • Fully Field Selectable
  • Transparent Case for Viewing Relay Status
 Specs
 Manuals (contact with email : [email protected])
 Print
Description

Description

Series LVC500 electronic level controls should be used whenever aliquid level needs to be maintained, such as pumping down an industrialsump, or indicated, such as a holding tank high level alarm. Asystem consists of three components; 1) Cut-to-lengththreaded electrode rods. 2) Single or multi-electrode holder. 3) Remoteelectronic module(s).

The LVC500 Series operates on a simple conductance principle whereby a small electrical current ispassed through the conductive liquid between two electrodes or an electrode and metallic tank wall. Forthose applications requiring a separate start and stop point, a single control module, plus twoelectrodes and tank reference are required. When several applications or levels are necessary within asingle tank, an electrode is needed for each level (plus tank reference), plus a multi-electrode holder and acontrol module for each differential or single level application.

Note:
Always treat hazardous areas with respect! If the electrodes or float switch is located in ahazardous area an intrinsically safe control module must be used. Intrinsically safecontrols must be installed by experienced personnel familiar with intrinsic safety wiring,and installation must be in accordance with the National Electrical Code (NEC). Thecontrol must be mounted in a non-hazardous location with the wiring to the level probes orfloat switch going into the hazardous atmosphere. Intrinsically safe wiring must beseparated from non-intrinsically safe wiring, and the length of your 14 or 16 gage copperwire must not exceed the specifications listed in the current installation manual. Consultyour local electrical code inspector for further details.
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ