Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Product Groups
Deep Tank-Sump Immersion Heaters
TRODEKS Engineering | Thermocouples, Pressure Transducers, Flow Meters, PID Controllers
TAT6
PLACE ORDER 
  • 12 mm (0.475") Diameter Incoloy® Elements and Stainless Steel Wetted Parts Standard
  • Designed for Permanent Installation in Outdoor/ Indoor Applications
  • 0.61 to 3.6 m (2 to 12') Vertical Riser Height (for Thermostat Designs)
  • Weathertight Mounting Hardware Supplied
  • Riser Adjustable to Facilitate Mounting Variations
  • Nema 4 Electrical Enclosure with 3/4" Conduit Fitting
  • 38 mm (1 1/2") Sludge Legs
  • Double-Pole 16 to 121ºC (60 to 250°F) Pilot Duty Thermostat
  • Watertight Thermowell Sized for 9.5 mm (3/8") Maximum Diagram Sensing Bulb
  • 120V, 208V, 277V, and 575V Versions Available (Contact trodeks)
 Manuals (contact with email : [email protected])
 Print
Description

Description

ApplicationThese fluid immersion heaters are designed for top mountingin large or deep enclosed tanks having a manhole accessor opening suitable to insert and attach the heater. Theyare usable for either outdoor or indoor applications, withinexposed or in-ground tanks and sewerage sumps. Theyare designed for permanent mounting and can be sealedweathertight with supplied gaskets and adjustableriser fittings.NEMA 4 terminal housing is easily removable and resealedto facilitate installation. Units are available with elementwatt densities from 6 watt/in² for heavy oils, to 60 watt/in²for clean water immersion applications. Element bundlediameters ranging from minimum of 254 mm (10") ODto a maximum of 762 mm (30") OD are available.ConstructionThe tubular elements are welded into a submersibleliquid-tight stainless steel junction box. Element power leadsare routed up through adjustable riser pipe and connected toa terminal block inside the upper NEMA 4 terminal housing.Unless specified otherwise, heaters are factory wired forthree phase and are easily converted to single phase.All wetted parts parts are 300 series stainless steel.Standard unit includes 15.5 to 121ºC (60 to 250°F)double-pole thermostat mounted in upper housing thathas a 9.5 mm (3/8") diameter bulb and capillary installed inwatertight thermowell with adjustable compression fitting.

Model No. KW Number of Elements mm (inch)
240V-1Ph 240V-3Ph 480V-1Ph 480V-3Ph A B E
TAT60001 TAT60002 TAT60003 TAT60004 5 3 1829 (72) 387 (15.25) 190 (7.5)
TAT60005 TAT60006 TAT60007 TAT60008 7.5 6 266 (10.5)
TAT60009 TAT60010 TAT60011 TAT60012 10 9 343 (13.5)
TAT60013 TAT60014 TAT60015 15 12 419 (16.5)
TAT60016 TAT60017 TAT60018 20 18 571 (22.5)
TAT60019 TAT60020 30 24 724 (28.5)
Ordering Example: TAT60001, 5 KW immersion heater, 240 Vac, 1 phase.
Anemometer  |   Automation  |   Accelerometers  |   Calibrator  |   Cartridge Heaters  |   Chart Recorders  |   Cryogenics  |   Custom Pressure Transducers  |   Data Loggers  |   Data Acquisition  |   Dial Thermometers  |   Fiber Optics  |   Fiber Optic Temperature Measurement  |   Flexible Heaters  |   Flow Meters  |   Glass Bulb Thermometers  |   Grippers  |   Heaters  |   Humidity Measurement  |   Integrated Circuit Sensors  |   Immersion Heaters  |   Infrared Thermometers  |   Level Measurement  |   Load Cells  |   M12 Temperature Connectors  |   Magnetic Flow Meter  |   Panel Meter  |   PID Controllers  |   pH meter  |   Pressure Gauges  |   Pressure Transducers  |   Pressure Transmitters  |   Rotameters  |   RTD  |   Remote Process Monitoring  |   Sanitary Sensors  |   Signal Conditioners  |   Stepper Motors  |   Strain Gages   |   Strip Heaters  |   Temperature Controllers  |   Temperature Labels  |   Temperature Measurement  |   Temperature Sensor Manufacturing  |   Temperature Sensors  |   Temperature Transmitters  |   Thermal Imagers  |   Thermistors  |   Thermocouple  |   Thermocouple Wire | Thermowell  |   Ultrasonic Flow Meters  |   Vortex Flow Meter  |   Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ