Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Thermocouple Probes with M8 Molded Connectors
M8M Series
PLACE ORDER - Available in Type "J" with a 304 Stainless Steel Sheath or Type "K" with an Inconel 600 Sheath
- Available in Single Element Configuration Only.
- Ungrounded Junctions are Standard, Optional Grounded Junction Sensors are Also Available
- Available in 1/8" ANSI Color Coded, and 2mm & 3mm IEC Color Coded Probe Diameters
- IP67 Molded M8 Connector with Thermocouple Compensated Pins
- A Selection of Overmolded M8 Thermocouple Extension Cables Is Also Available
Description
Description
The M8M series thermocouples, with their small diameter probes and M8 connectors, can be used where other sensors can't. Their smaller size allows for measurements in tight spaces, or when you need to have a minimum impact on the thermal environment that you are measuring.
These thermocouple sensors are available in Type J with 304 stainless steel sheaths, or in Type K with Inconel 600 sheaths. The 1/8" diameter version is overmolded in the ANSI color code and is available in 6", 9" and 12" lengths. The 2mm and 3mm diameter versions are molded in the IEC color code and is available in 150, 200 and 250mm lengths.
The connector pin out is as shown in the accompanying figure. To maintain the proper polarity and the use of thermocouple materials from the sensor to your measurement or control instrument, we recommend one of trodeks's M8 Thermocouple Extension Cables (listed in the ordering table below).
Specifications:
Type J Thermocouples have a 304 SST sheath with a temperature range of -40 to 600°C, with the connector overmolded in black nylon. Type K Thermocouples have an Inconel 600 sheath with a temperature range of -40 to 1150°C, with the connector overmolded in yellow nylon on the 1/8" diameter version, and green nylon on the 2mm and 3mm diameter versions. Note: Molded connectors have a maximum temperature of 90°C. Thermocouple output is per IEC 584-2, Class 2. Fractional sizes are available with 1/8" diameter x 6", 9" or 12" long probes. Metric sizes are available with 2mm or 3mm diameter x 150, 200 or 250mm long probes. Insulation Resistance is 100 megohms at 100VDC for ungrounded sensors. Minimum Bend Radius is three times the outer probe diameter.
Connect your M8 thermocouple probe to one of trodeks's wide variety of in-stock controllers, data loggers, hand held thermometers, PLCs or other measurement or process control products to complete your measurement or control system.
Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ