Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
Reversing DC Motor Speed Control
130 Series
PLACE ORDER - Provides DC Motor Speed Control with Reversing Capability
- Speed Regulation is ±1% of Base Speed
- Adjustable Minimum/Maximum Speed
- Adjustable Current Limit
- Speed Adjustment Using 5 KΩ Speedpot or 0 to 10 Vdc Analog Input Signal
- Onboard Dynamic Braking Resistor
- 5K Speed Pot with 8" Leads, Dial and Knob Included
- 50:1 Speed Range
Description
Description
The 130 Series reversing speed control is designed to provide instantreversing, quick precise stopping or rapid cycling for a wide range ofDC motor applications. The 130 Series reversing control outperformsother dynamic braking and reversing controls by utilizing unique zerospeeddetect and dynamic braking circuits. These circuits eliminatethe contact arcing and failed braking problems associated with otherreversing and dynamic braking controls. The zero speed detect circuitalso eliminates motor plug reversing problems. In the event of apower loss or emergency stop condition, the 130 Series control willdrop into a dynamic brake condition to safely and quickly bring themotor to a stop and remain there until power is reapplied and a runcondition is recognized.
SPECIFICATIONS
AC Input Voltage: ±10% of rated line voltage
Acceleration: 0.5 seconds
Amps–DC Output
130LC100 and 132LC200: 500 mA to 5.5 ADC*
130HC100 and 132HC200: 500 mA to 10 ADC
Controller Overload Capacity: 200% for one minute
Current Limit Trimpot Range
Models 130xx100 and 132xx200: 1 to 18 ADC
Deceleration: 0.5 seconds
Dimensions:
LC Models: 126.16 W x 107.95 L x 68.27 mm D (4.96 x 4.25 x 2.68")
HC Models: 158.75 W x 177.8 L x 103.2 mm D (6.25 x 7.0 x 4.06")
Weight:
LC Models: 489.87 g (1.08 lb)
HC Models: 1496.80 g (3.30 lb)
Drive Service Factor: 1.0
Efficiency: 85% typical
Input Frequency: 50 or 60 Hz
Trimpot Speed Range
Maximum: 60 to 110% of base speed
Minimum: 0 to 30% of maximum speed
Power Devices: Isolated case tab
Shunt Field Voltage: 100 Vdc for 120 Vac input; 200 Vdc for 240 Vac input
Shunt Field Current: 1 amp DC maximum
Speed Control: Via 5 kΩ 0.5 W potentiometer or 0 to 10 Vdc isolated signal
Speed Range: 50:1
Speed Regulation: ±1% of base speed
Temperature Range: -10 to 45°C ambient (15 to 115°F)
Terminal Block Torque Setting: 4.4 in. lb. maximum or 0.05 Nm
Transient Protection: G-Mov
Trigger: Opto-isolator
Start/Brake Cycle Per Minute
LC Models: 3 per min**
HC Models: 30 per min**
Operating Conditions
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: ±10% rated line voltage
Input Frequency: 50/60 Hz Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ