Your Source for Process Measurement & Control
UK
44-796-072-6366
Germany
49-178-631-1266
8-Channel Voltage Input USB Data Acquisition Modules
OM-USB-1208FS-1408FS
PLACE ORDER - Low Cost, Multifunction USB Devices with 4 Differential or 8 Single-Ended Analog Inputs
- Provides 12-Bit (OM-USB-1208FS) or 14-Bit (OM-USB-1408FS) Analog Input Resolution
- Maximum Sampling Rates Ranging from 1.2 kS/s to 50 kS/s
- 2 Analog Outputs
- 16 Digital I/O Lines
- One 32-Bit Counter Input Channel
- No External Power Required
Description
Description
The OM-USB-1208FS and OM-USB-1408FS dataacquisition modules offer four differential (DIFF) or eightsingle-ended (SE) analog inputs, two analog outputs,16 digital I/O channels, and one counter input.These modules are USB 2.0 full speed voltage inputdata acquisition modules (fully compatible with bothUSB 1.1 and USB 2.0 ports). These are plug-and-playmodules which draw power from the USB cable - noexternal power supply is required. All configurableoptions (including individual channel ranges) aresoftware programmable, and the modules are fullysoftware calibrated.
Both modules feature eight analog voltage inputchannels that are processed through a single A/Dconverter. The analog inputs to the OM-USB-1208FSare software configurable for either eight 11-bitsingle-ended or four 12-bit differential inputs. Theanalog inputs to the OM-USB-1408FS are softwareconfigurable for either eight 13-bit single-ended or four14-bit differential inputs.
These modules have one 32-bit counter channel. Thedigital I/O channels are software programmable forinput or output. Both models have two 12-bit analogoutputs. The packaging for the OM-USB-1208FS andOM-USB-1408FS ensures ease of use in a variety of applications
The OM-USB-1208FS and OM-USB-1408FS data acquisition modules are supplied with TracerDAQsoftware which is a collection of four virtual instrumentapplications used to graphically display and store inputdata and generate output signals:
• Strip Chart—Log and graph values acquire fromanalog inputs, digital inputs, temperature inputs and counter inputs
• Oscilloscope—Display values acquired fromanalog inputs
• Function Generator—Generate waveforms for analog outputs
• Rate Generator—Generate waveforms forcounter outputs
TracerDAQ PRO is an enhanced version of TracerDAQ.A comparison of some of the features included inTracerDAQ vs TracerDAQ PRO is shown on the PDF.
SOFTWARE
OM-USB-1208FS and OM-USB-1408FS modules shipwith an impressive array of software, including the newTracerDAQ®, a full-featured, out-of-the-box data logging,viewing, and analysis application. Driver support anddetailed example programs are included for UniversalLibrary programming libraries for Microsoft® VisualStudio® programming languages, and other languages,including DASYLab®, and ULx for NI LabVIEW®(comprehensive library of Vls and example programscompatible with 32-bit and 64-bit LabVIEW v8.5 through2013) and InstaCal™ installation, calibration andtest utility - powerful solutions for programmers andnonprogrammers alike. These modules operate under Microsoft Windows® XP (32-bit only) and VISTA/7/8(32-bit and 64-bit) operating systems.
ANALOG INPUT
OM-USB 1208FS: These devices provide eight, 11-bitsingle-ended analog inputs or four, 12-bit differentialanalog inputs.
OM-USB 1408FS: These devices provide eight, 13-bitsingle-ended analog inputs or four, 14-bit differentialanalog inputs.All devices support software selectable ranges thatprovide inputs from ±1V to ±20V in a differentialconfiguration, and ±10V in a single-ended configuration.
GENERAL INFORMATION
SAMPLING RATE: When scanning continuously tocomputer memory (hardware-paced mode), theOM-USB-1208FS can sample at a maximum of50 kS/s, and the OM-USB-1408FS can sample ata maximum of 48 kS/s.
CHANNEL-GAIN QUEUE
The channel-gain queue feature lets you configure alist of channels and gains for each scan. Each channelcan have a different gain setting. The gain settings arestored in a channel-gain queue list that is written tolocal memory on the device.The OM-USB-1208FS and OM-USB-1408FS channel gainqueue can contain up to 16 channels listed in anyorder.
ANALOG OUTPUT
The maximum analog output update rate for alldevices depends on several factors, including USBport speed. Both devices offer two 12-bit analogoutputs with a range of 0V to 4.096V.When updating continuously from computer memory(hardware-paced mode), one analog output updates ata maximum rate of 10 kS/s; two analog outputs updatesimultaneously at a maximum rate of 5 kS/s each.
DIGITAL I/O
All devices provide 16 TTL-level digital I/O lines. DigitalI/O can be programmed on each 8-bit port (Port A andPort B) for either input (default) or output.
EVENT COUNTER INPUT
Each device supports one 32-bit TTL-level counter thataccepts inputs up to 1 MHz.
SPECIFICATIONS
ANALOG INPUT
A/D Converter Type: Successive approximation
Channels: 8 single-ended (SE) or 4 differential (DIFF), software programmable
Input Common-Mode Voltage Range for Linear Operation:
SE Mode: CHx to GND, ±10V max
DIFF Mode: CHx to GND, -10V min, 20V max
Absolute Maximum Input Voltage: CHx to GND, ±28V max
Input Impedance: 122 kΩ
Ranges: Software selectable on a per-channel basis
SE Mode: ±10V
DIFF Mode: ±20V, ±10V, ±5V, ±4V, ±2.5V, ±2.0V, ±1.25V, ±1.0V
Throughput: Maximum throughput scanning to computer memory depends on the computer being used.
Software Paced: 250 S/s typ, system-dependent
Hardware Paced:
OM-USB-1208FS: 50 kS/s
OM-USB-1408FS: 48 kS/s
Channel Gain Queue: Up to 16 elements, software-selectable channel and range
Resolution:
OM-USB-1208FS:
DIFF: 12 bits, no missing codes
SE: 11 bits
OM-USB-1408FS:
DIFF: 14 bits, no missing codes
SE: 13 bits
CAL Accuracy (OM-USB-1208FS Only): CAL = 2.5 V, ±36.25 mV max
Integral Linearity Error
OM-USB-1208FS: ±1 least significant bit (LSB) typ
OM-USB-1408FS: ±2 LSB typ
Differential Linearity Error: ±0.5 LSB typ
Repeatability: ±1 LSB typ
CAL Current (OM-USB-1208FS Only):
Source: 5 mA max
Sink: 20 µA min, 100 µA typ
2.5VREF Accuracy (OM-USB 1408FS Only): ±36.25 mV max
2.5VREF Output Current (OM-USB 1408FS Only):
Source: 5 mA max
Sink: 20 µA min, 100 µA typ
Trigger Source (Software-Selectable):
External Digital: TRIG_IN
Clock Source: Internal; External (SYNC), rising edge triggered
ANALOG OUTPUT
Number of Channels: 2
Output Range: 0V to 4.096V, 1 mV per LSB
Resolution: 12 bits, 1 in 4096
Throughput: Maximum throughput scanning to computer memory depends on the computer being used
Software Paced: 250 S/s single channel typ, system-dependent
Hardware Paced:
Single Channel: 10 kS/s
Dual Channel: 5 kS/s
Power On and Reset Voltage
OM-USB-1208FS: Initializes to 000h code
OM-USB-1408FS: 0V, ±20 mV typ, initializes to 000h code
Output Drive (Each D/A OUT): 15 mA
Slew Rate: 0.8V/µs typ
Accuracy (All Values are ±): 0V to 4.096V: 4.0 LSB typ, 45.0 LSB max
Analog Output Accuracy Components
(All Values are ±): 0V to 4.096V
% of FSR: 0.1 typ, 0.9 max
Gain Error at Full Scale: 4.0 mV typ, 36.0 mV max
Offset: 1.0 mV typ, 9.0 mV max
Accuracy at Full Scale: 4.0 mV typ, 45.0 mV max
DIGITAL I/O
Digital Type: CMOS
Number of I/O: 16 (Port A0 through A7, Port B0through B7)
Configuration: 2 banks of 8
Pull Up/Pull-Down Configuration: All pins pulled upto 5V through 47 kΩ resistors (default);
change to pulldownusing internal user-configurable jumpers.
Input High Voltage: 2.0V min, 5.5V absolute max
Input Low Voltage: 0.8V max, -0.5V absolute min,0V recommended min
Output High Voltage (IOH = -6.0 mA): 3.84V min
Output Low Voltage (IOL = 6.0 mA): 0.33V max
Power On and Reset State: Input
EXTERNAL TRIGGER
Trigger Source: External digital, TRIG_IN
Trigger Mode: Edge sensitive; software-selectable forCMOS‑compatible rising or falling edge
Trigger Latency: 10 μs max
Trigger Pulse Width: 1 μs min
Input Type: Schmitt trigger, 47 kΩ pull-down to ground
Schmitt Trigger Hysteresis: 1.01V typ, 0.6V min,1.5V max
Input High Voltage Threshold: 2.43V typ, 1.9V min,3.1V max
Input High Voltage Limit: 5.5V absolute max
Input Low Voltage Threshold: 1.42V typ, 1.0V min,2.0V max
Input Low Voltage Limit: -0.5V absolute min, 0Vrecommended min
EXTERNAL CLOCK INPUT/OUTPUT
Pin Name: SYNC
Pin Type: Bidirectional
Direction (Software-Selectable):
Input (Default): Receives A/D clock from externalsource; active on rising edge
Output: Outputs internal A/D clock; active on risingedge
Input Clock Rate:
OM-USB-1208FS: 50 kHz, max
OM-USB-1408FS: 48 kHz, max
Clock Pulse Width:
Input Mode: 1 μs min
Output Mode: 5 μs min
Input Type: Schmitt trigger, 47 kΩ pull-down to ground
Schmitt Trigger Hysteresis: 1.01V typ, 0.6V min,1.5V max
Input High Voltage Threshold: 2.43V typ, 1.9V min,3.1V max
Input High Voltage Limit: 5.5V absolute max
Input Low Voltage Threshold: 1.42V typ, 1.0V min,2.0V max
Input Low Voltage Limit: -0.5V absolute min,0V recommended min
Output High Voltage: 4.4V min (IOH = –50 μA),3.80V min (IOH = –8 mA)
Output Low Voltage: 0.1V max (IOL = 50 μA),0.44V max (IOL = 8 mA)
COUNTER
Number of Channels: 1
Counter Type: Event counter
Pin name: CTR
Input Type: Schmitt trigger, 47 kΩ pull-down to ground
Input Source: CTR screw terminal
Resolution: 32 bits
Maximum Input Frequency: 1 MHz
High Pulse Width: 500 ns min
Low Pulse Width: 500 ns min
Schmidt Trigger Hysteresis: 1.01V typ, 0.6V min,1.5V max
Input High Voltage Threshold: 2.43V typ, 1.9V min,3.1V max
Input High Voltage Limit: 5.5V absolute max
Input Low Voltage Threshold: 1.42V typ, 1.0V min,2.0V max
Input Low Voltage Limit: -0.5V absolute min,0V recommended min
POWER
Supply Current: 80 mA (total current requirement;includes up to 10 mA for the status LED)
+5V USB Power Available:
Connected to Self-Powered Hub: 4.5V min,5.25V max
Connected to Bus-Powered Hub: 4.1V min,5.25V max
Output Current (total amount of current that canbe sourced from the USB 5 V,
analog outputsand digital outputs):
Connected to Self-Powered Hub or ExternallyPowered Root Port Hub: 420 mA max
Connected to Bus-Powered Hub: 20 mA max
NON-VOLATILE MEMORY
EEPROM: 1024 bytes
GENERAL
Operating Temperature Range: 0 to 70°C(32 to 158°F), 0 to 90% RH non-condensing
Storage Temperature Range: -40 to 70°C(-40 to 158°F), 0 to 90% RH non-condensing
Communications: USB 2.0 Hi-speed mode(480 Mbps) is recommended;
otherwiseUSB 1.1 full-speed mode (12 Mbps)
Microcontroller Type: High performance 32-bit RISC
Signal I/O Connector Type: Screw terminal
USB Cable Length: 3 m (9.84') max
Dimensions: 79 L x 82 W x 27 mm H (3.10 x 3.20 x 1.05")
Weight: 91 g (3.2 oz)
Anemometer | Automation | Accelerometers | Calibrator | Cartridge Heaters | Chart Recorders | Cryogenics | Custom Pressure Transducers | Data Loggers | Data Acquisition | Dial Thermometers | Fiber Optics | Fiber Optic Temperature Measurement | Flexible Heaters | Flow Meters | Glass Bulb Thermometers | Grippers | Heaters | Humidity Measurement | Integrated Circuit Sensors | Immersion Heaters | Infrared Thermometers | Level Measurement | Load Cells | M12 Temperature Connectors | Magnetic Flow Meter | Panel Meter | PID Controllers | pH meter | Pressure Gauges | Pressure Transducers | Pressure Transmitters | Rotameters | RTD | Remote Process Monitoring | Sanitary Sensors | Signal Conditioners | Stepper Motors | Strain Gages | Strip Heaters | Temperature Controllers | Temperature Labels | Temperature Measurement | Temperature Sensor Manufacturing | Temperature Sensors | Temperature Transmitters | Thermal Imagers | Thermistors | Thermocouple | Thermocouple Wire | Thermowell | Ultrasonic Flow Meters | Vortex Flow Meter | Wireless Sensors
trodeks.comtrodeks.com - فقخیثنس.زخئ - صصص.فقخیثنس.زخئ